Calculation sources of parameter values
Print
Modified on: Thu, 20 Feb, 2014 at 2:24 PM
- Active Energy Towards the Utility value is received from the multimeter which is placed in PCC. If
there is no multimeter in the PCC the value is coming from the protection
relay. In the rare case, that neither a multimeter nor a protection device has
been installed, the value is coming from the inverters.
- Production Active Energy value is received from the protection relay.
-
Array Output Energy
value is received from the inverters. At the plant level, this parameter
corresponds to the sum of the AC output power reported by the inverters.
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.
